Материнская плата Supermicro X9DRH-7F

----Материнская плата Supermicro X9DRH-7F

Артикул: 728

Подробнее

Есть в наличии (1)

Нашли дешевле?

Запросить цену

Наши менеджеры обязательно свяжутся с вами и уточнят условия заказа

Цена действительна только для интернет-магазина и может отличаться от цен в розничных магазинах

Описание

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X9DRH-7F -O	X9DRH-7F (Standard Retail Pack)
MBD-X9DRH-7F -B	X9DRH-7F (Bulk Pack)

Processor/Cache
CPU	Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family^† (up to 135W TDP **)
Note	† BIOS version 3.0 or above is required
Note	** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache	Up to 30MB
System Bus	QPI up to 8 GT/s

System Memory
Memory Capacity	16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type	1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes	32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	Intel® C602 chipset
AHCI SATA	SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1
SCU SATA	SATA 2.0 3Gb/s with RAID 0, 1, 10
SAS	SAS2 from Broadcom 2208 (1GB cache) HW RAID 0, 1, 5, 6, 10, 50, 60 support Supports up to 16 devices as default, more HDD devices support is also available as an option * * For special sku, please contact your Supermicro Sales.
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Video	Matrox G200eW

Input / Output
AHCI SATA	2 SATA 3.0 ports (6Gb/s) 4 SATA 2.0 ports (3Gb/s)
SCU SATA	4 SATA 2.0 ports (3Gb/s)
SAS	8 SAS2 ports (6Gb/s)
LAN	2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB	7 USB 2.0 ports total (4 rear + 2 via header + 1 Type A)
Video	1 VGA port
Serial Port / Header	2 Fast UART 16550 serial COM port (1 rear & 1 header)
DOM	1 DOM (Disk on Module) power connector
TPM	1 TPM Header


Chassis (Optimized for X9DRH-7F )
2U Chassis	CSE-825TQ-R740LPB CSE-826BA-R1K28LPB CSE-826BA-R920LPB CSE-826BE16-R1K28LPB CSE-826BE16-R920LPB CSE-826BE26-R1K28LPB CSE-826BE26-R920LPB
3U Chassis	CSE-835TQ-R920B CSE-836BA-R1K28B CSE-836BE16-R1K28B CSE-836BE26-R1K28B
Tower / 4U Rackmount	CSE-846BA-R1K28B CSE-846BE16-R1K28B CSE-846BE26-R1K28B CSE-847A-R1400B CSE-847A-R1K28LPB CSE-847E16-R1400B CSE-847E16-R1K28LPB CSE-847E26-R1400B CSE-847E26-R1K28LPB
Important Chassis Notes	To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.

Expansion Slots
PCI-Express	1 PCI-E 3.0 x16 6 PCI-E 3.0 x8 (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)

System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1

Management
Software	SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0
Power Configurations	ACPI / APM Power Management Power-on mode for AC power recovery

PC Health Monitoring
Voltage	Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator
FAN	8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED
Other Features	Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free Dual Cooling Zones

Operating Environment
Operating Temperature Range	10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range	-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non-Operating Relative Humidity Range	5% - 95% (non-condensing)